How to register a handset to the Yealink DECT Base stations.

How to register a handset to the Yealink DECT Base stations.


    • Related Articles

    • Registering a Handset with the W60B/W70B

      How to register a Yealink handset with a single W60B/W70B or multiple base stations The following steps may also apply to Yealink models W52B and W80B. With a Single W60B/W70B Hold down the Connect button on the base until the top light of the three ...
    • How do I update configuration / provisioning? [Yealink CP930W DECT Conference Phone]

      The CP930W has a different procedure compared with other Yealink wired phones. Related articles are linked below. To update configuration / provisioning on a CP930W: Press the Menu soft key Press 3 for Settings Press 2 for Advanced Enter the PIN ...
    • Factory resetting a Yealink W52P/W60P

      CAUTION - Factory resetting your phone removes all settings and restores your phone to a "like new" configuration. Be sure to back up any settings you require. Only continue if recommended by your PhoneOne support technician or if you have no ...
    • Factory resetting a Yealink desk or conference phone

      CAUTION - Factory resetting your phone removes all settings and restores your phone to a "like new" configuration. Be sure to back up any settings you require. Only continue if recommended by your support technician or if you have no concerns for ...
    • Rebooting or restarting a desk or conference phone.

      Removing the power to reboot can be tricky and could risk dropping the phone or damaging the power connector or the network connector (in the case of PoE power). Rebooting a Yealink phone without this is a simple procedure: Locate the X (or cancel) ...